Traktor Pro 2 Play And Nothing Happen
- This topic has 10 replies, 1 voice, and was last updated 7 years, 9 months ago by .
I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
Under Audio setup i have the following settings:
Audio device: ASIO4ALL v2
Sample rate: 24000Hz
Latency: 512Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”
I have no idea what to do with input & output routing, but have had no luck with just guessing.. could really use some help people.. if you need any more info, let me know.. thanks
On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.
- Posts
- The forum ‘DJing Software’ is closed to new topics and replies.
May 08, 2012 Nothing worked. FIX In the end I fixed it like this: Uninstalled all Traktor components, reinstalled the previous version of Traktor Pro (2.1.2) and reinstalled the earliest S4 drivers I could find (2.9.2) This has worked for me so far and seems to be back to. Dec 12, 2011 Traktor Pro Editor's Review. Take complete control of your music, mixing and creativity, with this professional mixing and DJ-ing tool. If you spin tracks for a living or on the side, then you need to listen up. I've looked at some mixing software over the past few months, but none have really 'sent' me. Traktor however, is a completely. Industry-leading 4-deck DJ software with unrivaled pro features. Innovative Stem decks for creative mixing. Powerful looping, over 40 effects, plus 1-knob Macro control. DIGITAL DJ STANDARD. TRAKTOR PRO 2 is the industry-leading DJ software – four decks and a stunning range of creative features designed for professional DJs. Jan 18, 2020 Pentium dualcore, E5400 @ 2.70GHz. Dell XPS 1702x 64 bit. Intel i5-2410 cpu @ 2.30GHz. Driving me mad. While I'm at it, Traktor Pro 2 is not responding to my Kontrol Z1- as in the knobs and faders have no effect on the program, but I can play my files through it. This didn't happen on my old computer with the Z1.
- This topic has 5 replies, 3 voices, and was last updated 3 years, 8 months ago by .
Hey!
After updating to windows 10 I have got some problems with the traktor pro 2 software. The only thing I can is to place songs on the decks but I can’t play them or do antyhing else with them. What can i do to make it work again??
-Anna
Hi Anna
I’ve been using Traktor & Windows 10 for a good 5 months now and had no issues what so ever. I’m even testing the new Beta version that will be released soon on my windows 10 machine and still no issues.
I have had the same issue as you but that was because i was mucking about with various settings. I just reloaded my saved .tsi setting and everything worked again.
What are you using to control the software A controller or just the PC?
You can start the “setup wizard” again see if that helps which can be found left bottom in preferences. This normally gives you a fresh start.
You shouldn’t need to go back a version as its been fully tested on W10 before its released to the public.
Hope it helps if not I’ll have a think as what to help with next.
Dave
Hi Anna
I use a Kontrol S4mk II so we should be able to see the same things. Dont panic their is a few more things to try before a new install. So before you go and start again try these.
Where you see the clock at the top, just to your left do you get any feedback from the “CTRL” indicator when you move any of the buttons/knobs on your S2? It will light up when you move somin.
Import the .tsi you get from NI for your S2 (not your saved one) that should have the basic settings to get the S2 up and running. Make sure its in external mode in the “output Routing” in preferences as your using the S2 to kontrol the software. Also make sure you have selected the NI Kontroler S2 in the “Audio setup” in the preferences box.
The link below is an image of the preferences box, copy the link into your browser and it will take you to Dropbox. You dont have to sign up to it you can view the image on the screen. Its an image of the preferences box with a red arrow next to the “setup wizard” This is what you press to start again. Dont do this yet tho as we have a few things to try.
You could reinstall Traktor but if it happens again you’ll be back to square 1 and not know what the issue was.
Dave.
Traktor Pro 2 Play And Nothing Happened
- The forum ‘DJing Software’ is closed to new topics and replies.